How to clean burnt grease from bottom of frying pans?

After preparing a variety of dishes, it is important to clean burnt grease from bottom of frying pans without damaging the coating. The product is washed taking into account the material of the product. The second rule is the moderate use of chemicals or mechanical techniques. Before once again trying to remove the carbon layer, the prospects of such a solution are assessed. A pan that is too old and dirty is easier to replace.

how to clean the outside bottom of a pan made of different material

The bottom of a cast-iron pan is unpretentious inside and out. It can be cleaned of carbon deposits using boiling. Water is poured into a large container and brought to a boil. The next step is to add 2 tablespoons of baking soda and washing powder, 1 tablespoon of office glue. As soon as the solution has become soapy, a cast iron product is placed in it for 2 hours. Dishes made of other materials are cleaned from carbon deposits bottom in a different way.

Carbon Grease removal method	Material
Cast iron Frying Pan	Teflon	Stainless steel	Aluminum(no enamel added and no non-stick coating)
Using the pan dishwasher	Not	Yes	Yes	Not
Using abrasive methods externally to remove carbon deposits	Yes	Not	Yes	Not
Using alkaline methods to clean the pan (soap, soda)	Yes	Yes	Yes	Not
Use of acids from carbon deposits (acetic, citric)	Yes	Not	Yes	Yes, but with great care.
Prolonged soaking of the pan	Not	Yes	Yes	Yes, but with great care.

After cleaning the bottom of a product made of steel, aluminum, and cast iron from carbon deposits, it is boiled for 30 minutes. Add 2 tablespoons of oil and salt to the water. The solution will restore the non-stick film.

Read How To Remove Burnt Sugar From The Oven?

How To Clean Burnt Grease From Bottom Of Frying Pans?

Before cleaning the frying pan of accumulated carbon deposits on the outside, assess the degree of contamination. Depending on the thickness and age of the mud layer, conservative or more stringent methods are chosen. The first category includes household chemicals. If it was not possible to remove traces of soot, oil, and other fat, they resort to boiling.

The second category of outdoor methods is referred to as more stringent. It is about using abrasive materials on the outside of the frying pan.To minimize the likelihood of damage to the non-stick surface task # 1. The hostess takes into account the characteristics of the material from which she made.

The maximum duration of mechanical cleaning from old carbon deposits is no more than 45-50 minutes.

Clean Burnt Grease From Bottom Of Frying Pans with scraper and heating

Thick layers of plaque form on the outside of the fryer pan. Caring for a cast iron pan involves using a metal scraper. The carbon removal procedure will take several hours. Fire will help speed it up. Every 15-20 minutes, the surface is heated over the stove.

The described technology is not suitable for aluminum products.

The grinding machine method is used when the pan is old. In case of an error, it will have to be discarded unambiguously. When working with carbon deposits, wear a respirator and gloves. The above method is not used when it comes to Teflon or ceramic surfaces. The conservative option is to scrub the outside with baking soda. Procedure:

for every 1 liter of water, take 1 tablespoon of soda;
the mixture is brought to a thick state;
the resulting paste treats the surface with carbon deposits;
the pan is washed inside and outside under running water;
the described procedure is repeated 2-4 times.

The described method does not apply to Teflon and aluminum surfaces.

Recommended for you How To Remove Melted Chocolate From Fabric?

Clean Burnt Grease from frying pan bottom By boiling

The classic option for carbon deposits is a saturated baking soda solution for cleaning the outside of the pan. It is prepared with the addition of components:

1 bar of laundry soap;
500 g of soda;
2 packs of silicate glue.

The components are added to a container of boiling water. The duration of the water procedures is 35 minutes.

Before releasing the product into a container with water, remove the wooden handle. If you cannot do this, then boiling a pan is contraindicated.

Once the ingredients have been collected, the procedure for removing carbon deposits from the outside is:

a large container is filled with water;
it is placed on the stove;
laundry soap is rubbed on a coarse grater;
it is poured into a container after the water boils;
the contents of both containers with silicate glue are poured into the liquid;
soda is added to the pan in which it is planned to boil the pan from the carbon deposits accumulated outside;
the solution is stirred until its contents become homogeneous;
a dirty product is placed in the pan;
the solution is brought to a boil;
the fire is turned off;
the dishes are left in a saucepan for 2 hours.

If, after the end of boiling, it was not possible to clean the bottom of the pan from carbon deposits from the outside, use an additional agent. The surface is treated with a metal scraper for 10-20 minutes. After cleaning is completed, the product is rinsed under running water.

From the moment the cleaning procedure begins and until its end, a window or window is opened in the kitchen. The supply of fresh air will not allow you to breathe in a specific smell.

In addition to these nuances, manufacturers of kitchen utensils pay attention to a number of others.

Method	Description	Note
Teflon	Water is poured into a container and brought to a boil. I put a Teflon-coated frying pan inside. After 20 minutes, the carbon deposits will disappear.	In addition to boiling in a solution of soda, household chemicals are used. When choosing the dosage and duration of cleaning, follow the manufacturer’s recommendations.
Ceramics	Carbon deposits on the outside will remove digestion with the addition of soda and powder.	A ceramic pan is boiled for no more than 30 minutes.
Enamelled surface	Boiling in a solution of soda and stationery glue.	The duration of the boil is 30 minutes.

In the latter case, carbon removal is associated with a high level of fire hazard.

clean burnt grease off pan with flam

It is one of the best ways to Clean Burnt Grease From Bottom Of Frying Pans. Blowtorch manipulations are carried out in the open air. A small area of the surface is heated, after which fat and other carbon deposits fall off. Open fire is the least sparing option. Even a new frying pan will ruin a careless action.

The second nuance is that the technology of removing traces of food and fat from the outside using an open flame is fraught with a high risk of fire. Housewives with experience are skeptical of her. With significant danger, the described method is inferior to others in terms of efficiency.

The blowtorch is suitable for processing an aluminum pan. A single area of the surface is exposed to the outside for no more than 10 seconds. If it was not possible to get rid of yellowness and other traces from 1 time, heavy artillery is used. Old dirt and carbon deposits will be removed by the “grinder”.

How to prevent carbon buildup bottom of frying pan?

Regular preventive treatment of the outside of the pan will eliminate problems. An easy way is to hand wash after each use. It is easier to remove minor contamination and restore its original shine. Other options:

you cannot use wire sponges and washing powder marked “station wagon” to remove carbon deposits;
you need to make sure that the food does not burn;
non-stick coating should not come into contact with metal;
the hot surface absorbs dirt faster, the pan is not heated above 240 ° C.

Conclusion

You can quickly clean burnt grease from bottom of frying pans when it is regularly monitored. Subject to daily use, large-scale cleaning is carried out once a week and at least 3 a week cosmetic cleaning of the surface. The second rule is that when preparing a cleaning solution, the characteristics of the material are taken into account. There should be no mistakes. Too hot or cold a composition will not be effective against carbon deposits or damage the product inside and out.