The clogged sewer confuses with its stench, limits the everyday side of life. Rational ways out of an unpleasant situation: call a plumber or clean the purification system yourself. The latter option is faster and cheaper. As handy materials, you can do cleaning pipe with vinegar and baking soda at home.
Why blockages occur in sewer pipes
Housewives use filters for large debris on drains in bathtubs and sinks. Models of modern plumbing include stainless steel counterparts, but not all. The plastic alternative is short-lived, but no less relevant.
Substances that cannot be stopped with water enter the sewer system: fat, hair, dead skin, food. All debris settles in a mass on the walls of the drain pipes in the kitchen, forming growths, gradually narrowing the lumen until a blockage occurs. An unpleasant odor emanates from the inside, which can be removed with the help of baking soda and vinegar.
In the first place in terms of the frequency of blockages is the kitchen sink, behind it is the bathroom, and the third is the toilet. With the latter, an unpleasant situation arises if you drain a thing that will definitely get stuck, catching on a pipe or in its bend: diapers, personal hygiene products, wet wipes. In this case, you will have to call a sewer cleaning specialist – you need to pump out the contents or disassemble the system. It all depends on the complexity of the situation, sometimes baking soda and vinegar are enough.
See also microwave lemon cleaning hack.
Cleaning Pipe With Vinegar And Baking Soda
Baking Soda and vinegar are safe for modern pipes and sewers. Harsh chemicals will damage the structure of the material, rendering the site unusable, requiring a complete replacement in the near future.
The disadvantage of the method with soda and vinegar is the inability to cope with the cork formed from a stuck solid element.
The action of the assembled substances is dictated by chemistry: the substance is converted to carbon dioxide, water, or salt. Soda and vinegar are externally manifested by the appearance of foam, the amount of which depends on the volume of materials used. It pushes the blockage of the sewer, causing additional pressure in the system, corrodes fatty deposits.
The entire sewer cleaning process is fast.
Step by step instructions to Cleaning Pipe With Vinegar And Baking Soda
When planning to get rid of the garbage in the sewer, you need to carry out preparatory work before the main procedure:
- use a plunger;
- Break up large pieces of the blockage with a special cable, which can be purchased at a hardware store;
- pour boiling water in large quantities, leave for half an hour.
For further steps, you will need baking soda, plain vinegar. There is a concentrated analog of acetic acid. The substance is more concentrated and effective, but there is a possibility of damage.
If there is no information about what the pipes are made of, it is better not to self-clean the sewage system, call a plumber.
Protect your hands with heavy rubber gloves before starting. Soda is harmless, but vinegar will corrode the skin with prolonged contact.
Step-by-step instructions to Cleaning Pipe With Vinegar And Baking Soda:
- Pour half of the contents of a standard package of soda into the drain.
- 0.5 tbsp. pour the vinegar into the drain. The efficiency will increase if the liquid is preheated in a microwave oven.
- Seal the hole with a rag so that the foam does not come out.
- Wait half an hour for the debris to dissolve.
- Uncork the drain tank, pour a full kettle of boiling water into it.
If the task is completed correctly, the problem has disappeared with the passability of the sewage system. If you find difficulty in draining the water, repeat the procedure.
You may also like descale kettle with vinegar and baking soda.
how does salt unclog drains?
You can add another free-flowing, but no less common product. Fast and efficient method.
Step-by-step instructions for cleaning sewers with soda and salt:
- Pour half a glass of baking soda and vinegar into the drain.
- Add salt in the same ratio.
- Pour boiled water over a kettle.
- Leave it overnight.
To check the sewage system, you need to clog the drain, draw a full sink of water and release it. It should get off quickly enough. Re-clean with baking soda, salt, and vinegar the next night.
After preliminary cleansing from the bottom hole blockage using boiling water, you need to wait half an hour and then perform the main action.
Steps to Unclog Your Drain with Baking Soda and Vinegar
- Dilute a glass of soda and vinegar with boiling water 1: 3. In this case, proportion is important.
- Pour the hot mixture down the drain.
- Wait half an hour, check the water drainage rate.
The baking soda and vinegar method often requires repeated use for maximum effectiveness.
Chemicals: unclog a drain without baking soda and vinegar
The advantages of chemical cleaners over soda and vinegar are their high efficiency, speed of operation, and convenient way of using.
A well-known industrial alternative is the Mole. Has numerous positive recommendations from users, a good reputation. Inexpensive relative to analogs. The substance is aggressive, suitable for metal and metal-plastic pipes and sewers. Effective options: Professional Mole and Active Mole.
The mole is dangerous for the skin, an important condition for use is protective rubber gloves.
Tiret is a German gel-like sewage product. It has several types: Standard, Turbo and Professional. Used to clear simple blockages and serious plumbing troubles. The substance envelops the pipe from the inside, corroding deposits that try to clog the sewer, but is gentle with the material of the system. A small amount is enough, which makes the drug economical. You can supplement it with baking soda and vinegar.
Other alternatives to baking soda and vinegar are available for cleaning, in the form of powders, liquids, gels. The action is the same, but with different intensities. They are considered safe for sewage, but frequent use will affect the structure of the material, leading to a breakdown.
Instructions for each are on the package, the recommendations are similar: pour / pour into the drain, wait a certain period of time, fill with water.
There are aggressive drugs that are contraindicated for use in plastic products, they always contain information. Such a thing can be purchased at specialized retail outlets and for home purposes. To be safe, use baking soda and vinegar first.
Check it out how to clean microwave with vinegar and baking soda?
how to keep main sewer line clean?
Experts recommend periodically cleaning the drain to prevent future problems:
- disassemble the pipes and flush once a year;
- clean the system with hot water on a weekly basis;
- use baking soda and vinegar according to the above method as prevention of blockage;
- use mesh filters, saving the sewer from large debris, long hair.
Be careful about getting food waste, other unwanted elements that can provoke a blockage into the drain. With regular constipation, an effective chemical will not help.
Conclusion
With careful handling of drains, improper installation of the sewerage system can cause poor drainage of water. See a professional for a preventive check. and use economical methods like described above cleaning pipe with vinegar and baking soda or salt for cleaning and unclog you sewers line.
